Grand Canyon 3 Burner System provides a high quality burner component to help complete your ideal gas fireplace.
Grand Canyon's 3 Burner system features a 304 stainless steel chassis for ultimate durability and performance while allowing for gas to flow in from either side of the burner. With 1 elevated back burner that stretches across the entire rear of the burner, 1 middle burner that rolls over the front log, and 1 ember burner, this component is sure to create enough heat to give your living space a much more comfortable atmosphere while the burner tines can be raised or lowered depending on the size of your fireplace opening and preferred log style.
This burner package comes complete with metal bar stock and burner pipes, lava rock, necessary fittings, a flex line and the ember damper clamp. With different burner size options and a propane or natural gas option, Grand Canyon has ensured a burner that will fit any style of indoor living space.
Assembled burner systems feature factory tested and installed control systems. Tested to the ANSI standard, these assembled system area plug and play approach. Indoor use ONLY, Stainless Steel pan construction with metal bar stock and burner pipes. Logs are Not Included.
Sizing: 18” – 42”
Style: Even distribution rear burner w/dual action middle burner & dedicated ember glow burner
Standards: ANSI Certified with Control Systems
Materials: Stainless Steel Chassis
Warranty: Lifetime Warranty – When Installed Indoors
Piping: 1/2” Piping & ½” Bar Stock
Fittings: Gas Inlet Left or Right
Convertible to LP: NG Burner convertible to LP
Media: Includes Lava Rock, Embers, & Connection Fittings
Pilot: Concealed Pilot Mounting Brackets
Design: Fully Welded System with Sandless Design
Refractory Logs: Grand Canyon Gas Logs, logs carry a lifetime warranty against any manufacturing defects or breakage as long as the products are installed inside. In the event defect or breakage occurs a replacement will be available to pick-up from the dealer at which the log set was originally purchased. This warranty does not cover breakage caused by excessive handling once installed and fired. Logs installed outdoors carry a (1) year warranty. This warranty is limited to the original purchaser only.
Burner: Grand Canyon Gas Logs outdoor stainless steel burners carry a lifetime warranty against manufacturer defects or breakage as long as the appliance is installed by a professional installer. In the event a defect or breakage occurs a replacement will be available for pick-up from the dealer at which the burner was originally purchased.
Electrical and Valves: Grand Canyon Gas Logs valves, pilot assemblies and electrical components carry a (1) year warranty against breakage or defects from date of purchase, by original purchaser, and must be installed by a licensed professional installer. This warranty only covers use with Grand Canyon Gas Logs burners and logs In the event a defect or breakage occurs a replacement will be available for pick-up from the dealer at which the burner was originally purchased.
GFRC Fire-Tables: Grand Canyon Gas Logs GFRC Fire Tables carry a (1) year warranty against manufacturer defects. Grand Canyon Gas Logs will replace products which have proven to be defective in workmanship and material. ALL Fire-Tables MUST be covered when not in use to prevent efflorescence. Damage due to severe or catastrophic weather is not covered under this warranty. The warranty is limited to the original purchaser, and must be installed by a licensed professional installer. This warranty only covers use with Grand Canyon Gas Logs burners and logs In the event a defect or breakage occurs a replacement will be available for pickup from the dealer at which the burner was originally purchased.
Care & Cleaning of the Product: Standard Concrete and GFRC Products can be cleaned by simply wiping down the product using a solution of 1-part vinegar to 4-parts of water. If areas of excess dirt exist, use a soft bristled brush to gently scrub the surface then rinse with clean water. Cleaning and/or resealing of the product should follow the instructions of the sealer to be applied. For Cold weather applications, it is always best that all products remain as dry as possible and all water is drained prior to freezing temperatures. The installer is responsible for the implementation and design of the need for cold weather care procedures. Covers can be utilized and are a suggested cold weather application need but covers alone will typically not meet all requirements. Hard freeze of product may cause damage to the product.
DFW Coping Glass Fiber Reinforced Concrete Products ( GFRC ): GFRC products are made with, but not limited to Portland Cement, Glass Fibers, Silicon Aggregate and Water all of which are Non-Combustible and meets the requirements of ASTM E-136. In addition, tests for non-combustibility, ignitability and fire propagation have been conducted in accordance with “Fire Test on Building Materials and Structures”. BS476, Part 4,5 and Section 6532. GFRC also meets the requirements of NFPA (National Fire Protection Agency) Class A and UBC Class 1 when tested in accordance with ASTM E84, resulting in a “O” Flame Spread Rating and less than a 5-smoke density. Additionally, the DFW Coping GFRC products contain internal waterproofing materials to enhance the products to withstand water and planter applications.
Grand Canyon Gas Logs LLC | 3435 East Atlanta Ave. Phoenix, AZ 85040 | CustomerService@GrandCanyonGasLogs.com | (P)602-344-4217